Verity Nova 200M, 230 volt
Description
Submersible pump for draining grey water or rainwater in residential building service. The vertical outlet and built-in float enable the pump to be installed in small pit, even 20 x 20 cm. The pump features a selector for manual or automatic operation.
The pump body, impeller and suction grid are made of corrosion-resistant technopolymer, and the motor shaft of special stainless steel. Robust and reliable, ceramic bushing and triple-ring sealing with rings in oil bath, continuous duty asynchronous submersible motor.
Stator enclosed in airtight stainless steel casing. Rotor mounted on oversized ball bearings. Built-in thermal protection in all single-phase versions.
Enables suction of liquid up to the minimum level of 2 mm in the manual mode. Features a non-return valve and connector for different-diameter pipes.
Technical Data
| Impeller diameter [mm] | 90 mm |
| Head (H) max [m] | 7.6 m |
| Insulation class | F |
| Flowrate (Q) max [l/min] | 138.3 l/min |
| Capacitor Voltage [Vc] | 450 V |
| Protection degree (IP) | IP 68 |
| Flowrate (Q) BEP [l/min] | 58.3 l/min |
| Head (H) BEP [m] | 5 m |
| EAN code | 8059893053336 |
| Head (H) min [m] | 0.04 m |
| Current Nominal (In) @DELTA [A] (or @1P) | 1.3 A |
| Liquid temperature maximum [°C] | 35 °C |
| Impellers number | 1 |
| P1 max [W] | 330 W |
| Power supply frequency | 50 Hz |
| P1 max [kW] | 0.33 kW |
| Capacitor Capacity [μF] | 8 |
| Power supply voltage DELTA (1P - Running) max [V] | 240 V |
| I max [A] | 1.3 A |
| Motor Poles | 2 |
| P2 Nominal [W] | 180 W |
| P2 Nominal [HP] | 0.25 metric hp |
| Power supply voltage DELTA (1P - Running) min (or Nominal) [V] | 220 V |
| P2 Nominal [kW] | 0.18 kW |
| Motor Phases | M |
| Configuration | Single |
